USBee DX
USBee DX Home
Logic Analyzer
Oscilloscope
Mixed Signal OScope
Voltmeter
Signal Generator
Bus Decoders
Data Extractors
Data Logger
Frequency Counter
Remote Controller
PWM Controller
Frequency Generator
I2C Controller
Pulse Counter
Toolbuilder Source
Downloads
FAQ
Buy
Quick Links
Software Download
Getting Started Guide
Users Manual
|
USBee DX Mixed Signal Oscilloscope, Logic Analyzer and Bus Analyzer
|
The USBee DX
Test Pod is a HUGE sample buffer PC and USB based programmable multifunction digital storage 2-channel
oscilloscope,
16-channel logic analyzer, streaming bus protocol decoder and digital signal generator in a single
compact and easy to use device.
It is the ideal bench tool for engineers, hobbyists
and students.
Decodes and Streams I2C, SPI, ASYNC, CAN, USB Low and Full Speed, I2S, 1-Wire, SM Bus, Parallel, Serial, and PS/2 bus data.
|
|
How it Works
Connecting to your PC, the USBee DX Test Pod uses the power and speed of the USB 2.0 bus to capture and control analog and digital information from your own hardware designs. The USBee DX takes advantage of already existing PC resources by streaming data over the High-Speed USB 2.0 bus to and from the PC. This allows the PC to perform all of the triggering and data storing and makes possible an affordable USBee DX, while pushing the sample storage
capabilities orders of magnitudes beyond that of traditional dedicated oscilloscopes, logic analyzers or signal generators. The USBee DX Test Pod can utilize available PC memory as the sample buffer, allowing selectable sample depths from one to many hundreds of millions of samples.
The USBee DX also provides embedded bus protocol decoding and streaming for many of the common busses: SPI, ASYNC, CAN, USB, ASYNC, 1-Wire, Serial, Parallel, PS/2 and SMBus. The unique USBee DX system architecture allows the bus data to be extracted from a Logic Analyzer trace, or streamed continuously in real time using the Data Extractors to the screen or a data file for later evaluation. You can now capture the data your system is streaming to find those elusive bugs.
And with the continuously streaming data you don't need to worry about how large a trace buffer you have. You can capture to disk all of the bus traffic, even if your test runs for days.
The USBee DX PacketPresenter™ displays the bus traffic that is being transmitted between ICs
or system components in a graphical, easy to understand packet format that can be customized to your specific design. With standard logic analyzers,
engineers have been accustomed to counting bits, manually decoding protocols,
and parsing embedded bus traffic into useable fields. The PacketPresenter
does this for you automatically. With the PacketPresenter, counting bits
on a logic analyzer is a thing of the past.
The USBee DX Test Pod can capture and generate samples up to a maximum of 24 million samples per second depending on the PC configuration. The USBee DX Auto-Calibration feature automatically reduces the sample rate to ensure
accurate and reliable timing, even on systems with slower processor and USB bus speeds.The USBee DX Test Pod perfectly merged features and functions to provide exactly the performance needed for hardware and microprocessor designs such as BASIC Stamp and PIC systems to ensure an affordable and compact unit.
The USBee DX Test Pod does not need an external power supply. The USB bus supplies the power to the pod, so your PC will be supplying the power. The Pod does, however, require a self powered
hub (not bus powered) if a hub is used between the PC and Pod.
back to top
Features
The USBee DX is a high end configuration of testing features as shown in the following table.
USBee DX Test Pod
|
Bus Data Extractors
|
|
|
16 bi-directional digital and 2 analog channels provide all these functions in a tiny and easy to use device.
|
 |
Continuously stream real-time bus traffic to the screen or a file. Supports SPI, Serial, I2C, I2S, Async, USB Full and Low Speed, SMBus, 1-Wire, Parallelor CAN busses.
|
Oscilloscope/Logic Analyzer
|
Bus Decoders
|
|
|
2A x 16D Mixed Signal Storage Oscilloscope and Logic Analyzer. Includes the Bus Decoders
|
|
Decode SPI, Serial, I2C, I2S, Async, USB Full and Low Speed, SMBus, 1-Wire, Parallel or CAN busses.
|
|
|
PacketPresenter
|
|
|
See bus data the way you visualize it.
|
Digital Signal Generator
|
Data Logger
|
|
|
Generate digital waveforms.
|
|
Log the state of the USBee signals.
|
Voltmeter
|
Frequency Counter
|
|
|
Measure analog voltages.
|
|
Measure the frequency of a USBee signal.
|
I2C Bus Controller
|
Frequency Generator
|
|
|
Create I2C scripts including detailed start, stop and ack positioning.
|
|
Generate a number of standard frequencies.
|
PWM Controller
|
Pulse Counter
|
|
|
Control independent PWM signals using scroll bars
|
|
Count edges of digital pulses.
|
Toolbuilder Source Code API
|
Remote Controller
|
|
|
Write your own Visual Basic or C++ tools that control the USBee. Includes full Logic Analyzer and Signal Generator functionality.
|
|
Toggle the state of a USBee digital signal with the push of a button.
|
back to top
PC System Requirements
The USBee DX Test Pod requires the following minimum PC features:
- Windows® Vista, XP or Windows® 2000 operating system
- Pentium or higher processor
- One USB2.0 High Speed enabled port. It will not run on USB 1.1 Full Speed ports.
- 32MBytes of RAM
- 125MBytes of Hard disk space
- Internet Access (for software updates and technical support)
back to top
Each Package Includes
The USBee DX contains the following in each package:
- USBee
DX Universal Serial Bus Pod
- Set
of 24 multicolored test leads and high performance miniature test clips
- Getting
Started Guide
- USB Cable (A to Mini-B)
- USBee
DX Test Pod CD-ROM
back to top
|
