|
Capture
the streaming real-time data flowing in
your embedded design easily with the USBee
DX Data Extractors.
The
Data Extractors will collect the raw data
from Parallel, Serial, I2C, I2S, Async,
USB Full and Low Speed, SMBus, 1-Wire or
CAN busses and store the data to disk or
pass it to your own processing application
in real-time.
|
|
Data Extractor Features
- Captures
continuous real-time bus data
- Stores data
to disk or process it in real-time
- Runs
indefinitely
- Captures
entire test sequences
- Monitors
embedded system data flows during normal
operation
- Processes
or stores Megabytes, Gigabytes or Terabytes of
data
- Special
Viewer to view and search through the
extracted data files quickly
- Lets
you write your own software to further
process the extracted data using the
Extractor API libraries.
|
Extractor
Modules
Parallel
Bus Data Extractor (details...)
|
Parallel
Bus Data Extractor
The Parallel Bus Data Extractor
takes the real-time streaming data from an embedded
8-bit parallel bus, formats it and allows you to save the data
to disk or process it as it arrives.
Specifications
- Continuous
Real-Time Data Streaming
- 8 digital
channels
- TTL
Level inputs (0-5V max)
- Synchronous
or Asynchronous Clocking
- Sync.
(external) clock 1kB/s to 16MB/s*
- Async.
(internal) clock 1MB/s to 24MB/s*
- Input
in 1, 2 or 4 byte words
- Little
or Big Endian
- Ouput
to Binary File*
- Output
to Text File (Hex, Decimal, Binary or ASCII)*
- Output
to Screen*
- Comma,
Space, or Newline Delimited files
- Output
Value Filtering
- Output
File Viewer (including binary, text, search
and export functions)
-
Extractor API libraries interface directly
to your own software to further
process the extracted data. Any
language that supports calls to
DLLs is supported.
*
- output bandwidths are dependent on PC
USB hardware, hard disk and/or screen throughput.
back
to top
|
Above
is one example of the output from this extractor.
For all available output formats and
settings, please download the complete Users
Manual above.
|
Serial
Data
The Serial Bus Data Extractor takes the real-time streaming
data from up to 8 serial data lines, formats it and allows you to save the data
to disk or process it as it arrives.
Specifications
- Continuous
Real-Time Data Streaming
- Continuous
Real-Time Data Streaming
- 8
digital channels
- TTL
Level inputs (0-5V max, Vih = 2.0V,
Vil = 0.8V)
- Synchronous
or Asynchronous Clocking
- Synchronous
(external) clock 0 to 16MB/s*
- Asynchronous
(internal) clock 1MB/s to 24MB/s*
- Input
in 1, 2 or 4 byte serial words
- Little
or Big Endian
- Output
to Binary File*
- Output
to Text File (Hex, Decimal, Binary
or ASCII)*
- Output
to Screen*
- Comma,
Space, or Newline Delimited files
- Output
Value Filtering
- Output
File Viewer (including binary, text,
search and export functions)
- Extractor
API libraries interface directly
to your own software to further
process the extracted data. Any
language that supports calls to
DLLs is supported.
*
- output bandwidths are dependent on PC
USB hardware, hard disk and/or screen throughput.
back
to top
|
Above
is one example of the output from this extractor.
For all available output formats and
settings, please download the complete Users
Manual above.
|
I2C
The I2C Bus Data Extractor takes the real-time
streaming data from the I2C bus, formats it and allows you to save the data to
disk or process it as it arrives.
Specifications
- Continuous
Real-Time Data Streaming
- Monitors
one I2C Bus
- TTL
Level inputs (0-5V max, Vih = 2.0V,
Vil = 0.8V)
- Time
Stamp for each packet
- Output
to Text File*
- Output
to Screen*
- Comma
or Space Delimited files
- Output
File Viewer (including binary, text,
search and export functions)
- Extractor
API libraries interface directly
to your own software to further
process the extracted data. Any
language that supports calls to
DLLs is supported.
*
- output bandwidths are dependent on PC
USB hardware, hard disk and/or screen throughput.
|
|
|
Above
is one example of the output from this extractor.
For all available output formats and
settings, please download the complete Users
Manual above.
back
to top
|
SM Bus
The SM Bus Data Extractor takes the real-time
streaming data from the SM bus, formats it and allows you to save the data to
disk or process it as it arrives.
Specifications
- Continuous
Real-Time Data Streaming
- Monitors
one SM Bus
- TTL
Level inputs (0-5V max, Vih = 2.0V,
Vil = 0.8V)
- Time
Stamp for each packet
- Output
to Text File*
- Output
to Screen*
- Comma
or Space Delimited files
- Output
File Viewer (including binary, text,
search and export functions)
- Extractor
API libraries interface directly
to your own software to further
process the extracted data. Any
language that supports calls to
DLLs is supported.
*
- output bandwidths are dependent on PC
USB hardware, hard disk and/or screen throughput.
|
|
|
Above
is one example of the output from this extractor.
For all available output formats and
settings, please download the complete Users
Manual above.
back
to top
|
SPI
The SPI Bus Data Extractor takes the real-time streaming
data from an SPI bus, formats it and allows you to save the data to disk or
process it as it arrives.
Specifications
- Continuous
Real-Time Data Streaming
- Monitors
one SPI Bus
- TTL
Level inputs (0-5V max, Vih = 2.0V,
Vil = 0.8V)
- SPI
Clock speeds up to 12MHz
- Asynchronous
(internal) sampling of 1MB/s to
24MB/s*
- Output
to Binary File*
- Output
to Text File*
- Output
to Screen*
- Output
File Viewer (including binary, text,
search and export functions)
- Extractor
API libraries interface directly
to your own software to further
process the extracted data. Any
language that supports calls to
DLLs is supported.
*
- output bandwidths are dependent on PC
USB hardware, hard disk and/or screen throughput.
back
to top
|
Above
is one example of the output from this extractor.
For all available output formats and
settings, please download the complete Users
Manual above.
|
High Speed ASYNC
The Async Bus Data Extractor takes the real-time
streaming data from up to 8 embedded asynchronous buses (UART), formats it and
allows you to save the data to disk or process it as it arrives.
Specifications
- Continuous
Real-Time Data Streaming
- 8
digital channels
- TTL
Level inputs (0-5V max, Vih = 2.0V,
Vil = 0.8V)
- Baud
Rates from 1200 baud to 12 Mbaud
*
- Data
Bit Settings (5, 6, 7 or 8)
- Parity
Bit Settings (Mark, Space, Odd,
Even, Ignore, None)
- Time
Stamps of start of bytes or packets
- Output
to Text File (Hex, Decimal, Binary
or ASCII)*
- Output
to Screen*
- Comma,
Space, or Newline Delimited files
- Output
File Viewer (including binary, text,
search and export functions)
- Extractor
API libraries interface directly
to your own software to further
process the extracted data. Any
language that supports calls to
DLLs is supported.
*
- output bandwidths are dependent on PC
USB hardware, hard disk and/or screen throughput.
back
to top
|
Above
is one example of the output from this extractor.
For all available output formats and
settings, please download the complete Users
Manual above.
|
USB
The USB Data Extractor takes the real-time streaming data
from the Full or Low Speed bus, formats it and allows you to save the data to
disk or process it as it arrives.
Specifications
- Continuous
Real-Time Data Streaming
- One
USB Bus running at Low (1.5Mbps)
or Full Speed (12Mbps) USB (not
High Speed)
- TTL
Level inputs (0-5V max, Vih = 2.0V,
Vil = 0.8V)
- Time
Stamp for each packet
- Output
to Text File*
- Output
to Screen*
- Comma,
Space, or Newline Delimited files
- Packet
filter on Device Address, and/or
Endpoint
- Output
File Viewer (including binary, text,
search and export functions)
- Extractor
API libraries interface directly
to your own software to further
process the extracted data. Any
language that supports calls to
DLLs is supported.
*
- output bandwidths are dependent on PC
USB hardware, hard disk and/or screen throughput.
back
to top
|
Above
is one example of the output from this extractor.
For all available output formats and
settings, please download the complete Users
Manual above.
|
CAN
The CAN Bus Data Extractor takes the real-time streaming
data from the CAN bus, formats it and allows you to save the data to disk or
process it as it arrives.
Specifications
- Continuous
Real-Time Data Streaming
- Monitors
one CAN Bus
- TTL
Level inputs (0-5V max, Vih = 2.0V,
Vil = 0.8V) – intended to be used
on the digital side of a CAN bus
transceiver (such as the Microchip
MCP2551)
- 11
or 29-bit identifier supported
- Time
Stamp for each packet
- Output
to Text File*
- Output
to Screen*
- Comma
or Space Delimited files
- Packet
filter on Identifier
- Output
File Viewer (including binary, text,
search and export functions)
- Extractor
API libraries interface directly
to your own software to further
process the extracted data. Any
language that supports calls to
DLLs is supported.
*
- output bandwidths are dependent on PC
USB hardware, hard disk and/or screen throughput.
|
|
|
Above
is one example of the output from this extractor.
For all available output formats and
settings, please download the complete Users
Manual above.
back
to top
|
1-Wire
The 1-Wire Bus Data Extractor takes the real-time streaming
data from a 1-Wire bus, formats it and allows you to save the data to disk or
process it as it arrives.
Specifications
- Continuous
Real-Time Data Streaming
- Monitors
one 1-Wire Bus
- TTL
Level inputs (0-5V max, Vih = 2.0V,
Vil = 0.8V)
- Asynchronous
(internal) sampling from 1MB/s to
24MB/s*
- Output
to Binary File*
- Output
to Text File*
- Output
to Screen*
- Output
File Viewer (including binary, text,
search and export functions)
- Extractor
API libraries interface directly
to your own software to further
process the extracted data. Any
language that supports calls to
DLLs is supported.
*
- output bandwidths are dependent on PC
USB hardware, hard disk and/or screen throughput.
back
to top
|
Above
is one example of the output from this extractor.
For all available output formats and
settings, please download the complete Users
Manual above.
|
I2S
The I2S Bus Data Extractor takes the real-time streaming
data from an I2S bus, formats it and allows you to save the data to disk or
process it as it arrives.
Specifications
- Continuous
Real-Time Data Streaming
- Monitors
one I2S Bus
- TTL
Level inputs (0-5V max, Vih = 2.0V,
Vil = 0.8V)
- I2S
Bit Clock up to 12MHz
- Asynchronous
(internal) sampling from 1MB/s to
24MB/s*
- Output
to Binary File*
- Output
to Text File*
- Output
to Screen*
- Output
File Viewer (including binary, text,
search and export functions)
- Extractor
API libraries interface directly
to your own software to further
process the extracted data. Any
language that supports calls to
DLLs is supported.
*
- output bandwidths are dependent on PC
USB hardware, hard disk and/or screen throughput.
back
to top
|
Above
is one example of the output from this extractor.
For all available output formats and
settings, please download the complete Users
Manual above.
|
|
