Logic Analyzer using the USBee LX - Digital Design

PC based Logic Analyzer - USBee LX Logic Analyzer - Embedded Digital Design and USB Development

FÌ>USBee LX Analyzer

USBee LX PC based Logic Analyzer

The Logic Analyzer software that runs on your PC and controls the USBee LX Digital Test Pod is a powerful addition to any design and debugging development.

The PC based Logic Analyzer software provides the following functions:

Tiny USBee Pod (2" x 1.5" x 0.5") connects to your hardware
Logic Analyzer software runs on your PC
USB connects the pod to your PC
Sample Rates (1ksps to 24Msps)
8 channels
Sample Clock (Output for internal timing, Input for external timing)
External Trigger signal
Waveform display (above)
Listing display
Save, Open and Print captured data and settings
Movable cursors for easy measurements
Output files can be loading into Signal Generator to "playback" the capture

The USBee LX Digital Test Pod does not need an external power supply. The USB bus supplies the power to the pod, so your PC will be supplying the power.

Specifications for the USBee LX running the USBee LX Logic Analyzer Module

Maximum Sample Rate	24 Msps Internal Timing 16 Msps External Timing
Number of Channels	8
Internal Clocking (Timing Mode)	Yes
External Clocking (State Mode)	Yes Clock Polarity selectable
Trigger Levels	1
Trigger Qualifiers	External Trigger Signal Rising Edge Falling Edge High Low
Number of Samples	6144
Available Sample Rates	24Msps 12Msps 6Msps 3Msps 2Msps 1Msps 500ksps 200ksps 100ksps 50ksps 20ksps 10ksps 1ksps
Trigger Prestore	Yes - 32 positions from beginning to end of buffer
Trigger Poststore	Yes, up to 6144 samples
Sample Clock Output	Yes, on Internal Clocking Clock Polarity selectable

Not enough sample buffer for you?
Try the USBee ZX

Compare the USBee, USBee ZX and USBee LX Logic Analyzer Features

Buy a Pod

Download the Logic Analyzer Software

What else can the USBee LX Do?

signal generator - logic analyzer - frequency coutner home