The USBee Digital Test Pod combines state of the art design with easy to use PC software to give you a complete digital test bench in a small and affordable package. Connecting to your PC, the USBee Digital Test Pod uses the power and speed of the USB bus to capture and control information from your own hardware designs.

The USBee is a complete digital test bench in one compact and easy to use pod. Combined with the free, yet powerful, Windows® software the USBee is a Logic Analyzer, Signal Generator, Frequency Counter, Power Supply, Data Logger, Remote Controller, and PWM Controller. You can also build your own tools using the USBee Tool Builder software and Visual Basic or Visual C.

Logic Analyzer

Capture digital signals at up to 3Msps and display them on your PC

Signal Generator

Draw  digital waveforms and generate them at up to 1.5Msps.

Frequency Counter

Measure the frequency of 2 independent signals (0 to 3MHz)

Remote Controller

Toggle the state of a USBee digital signal with the push of a button

Data Logger

Log the state of the USBee signals over time at 1/4s  to 300s per sample

PWM Controller

Control 8 independent PWM signals using scroll bars

USBee Toolbuilder Sourcecode

Write your own Visual Basic tools that control the USBee.  Visual C libraries also available.

USBee

Maximum Sample Rate

3 MHz in LA
1.5 MHz in SigGen

Number of Channels

8

Internal Clocking

Yes

External Clocking

No

Trigger Levels

1

Trigger Qualifiers

Any Signal
Any Level

Number of Samples

6100 in LA
2048 in SigGen

Sample Rates

Up to 3 MHz LA
Up to 1.5MHz SigGen

Trigger Prestore

No

Trigger Poststore

Yes

Sample Clock Output

Yes

Power Supply Outputs

Regulated +3.3V
+5V

Test Leads

Twelve 9" leads with 0.025" square sockets

USB Cable Length

6 Feet

Dimensions

2.1" x 1.3" x 0.5"

Minigrip Test Clips

12

Channel Output Drive Current

2mA

Maximum Input Voltage

+5.5V

Input Low Level

< 0.8V

Input High Level

> 1.4V

Output Low Level

< 0.8V

Output High Level

> 2.4V