USBee Signal Generator for Embedded Digital Design and USB Development

Logic_Analyzer 
Signal_Generator 
Frequency_Counter 
I2C Controller 
Freq. Generator 
Data Logger 
Remote Controller 
PWM Controller 
Pulse Counter 
FÌ>USBee Generator

 

USBee based Signal Generator

The Signal Generator software that runs on your PC and controls the USBee Digital Test Pod is a powerful addition to any design and debugging development.

The Signal Generator software provides the following functions:

  • Tiny USBee Pod (2.1" x 1.3" x 0.5") connects to your hardware
  • USB connects the pod to your PC
  • Signal Generator software runs on your PC
  • Generate Sample Rates (10ksps to 1.5Msps)
  • 8 channels
  • Output Sample Clock
  • Waveform display lets you "Draw" the signals you want (above)
  • Also import text files containing data to generate
  • Save, Open and Print data and settings
  • Movable cursors for easy measurements
  • Can input files saved by the Logic Analyzer module to "playback" the capture

Specifications for the USBee running the Signal Generator Module

Maximum Sample Rate

1.5 Million samples
per second

Number of Channels

8

Internal Clocking

Yes

External Clocking

No

Number of Samples

2048

Available Sample Rates

1.5Msps
1Msps
500ksps
200ksps
100ksps
50ksps
20ksps
10ksps

Sample Clock Output

Yes

Power Supply Outputs

Regulated +3.3V
+5V

Test Leads

Twelve 9" leads with 0.025" square sockets

USB Cable Length

6 Feet

Dimensions

2.1" x 1.3" x 0.5"

Minigrip Test Clips

12

Channel Output Drive Current

4mA

Output High Level

> 2.7V

Output Low Level

< 0.8V

The USBee Digital Test Pod does not need an external power supply.  The USB bus supplies the power to the pod, so your PC will be supplying the power.

Buy It Here

Not fast enough for you?  
Try the USBee ZX

Copyright(c) 2004 CWAV. All rights reserved.
support@usbee.com

signal generator - logic analyzer - frequency counter home